1936 Plymouth 4 Door.
Owner Steve Nickola from Chandler, AZ.
Street Rod Engineering Manufactured and
installed the Mustang II
front suspension, Rear Spring kit, Motor & Transmission mounts
(small block Chevy) and the Brake pedal assembly.
Pictures updated 8-1-08
Check the height of the nose. I
didn't cut a complete coil out of the spring only 1/2 of the way around the
top.
The car handles like a go cart. I've had it to 130 mph and it handles like
70mph. And it stops just as good.
No wear to speak off with the a/arm bushings after almost 14000 miles.
Click on small picture to see a larger photo
